LabVIEW Wiki - User contributions [en]

LabVIEW configuration file/Miscellaneous

2014-02-19T23:55:17Z

Jeffreyh:

This is a list of Miscellaneous LabVIEW ini File settings. {{TOCright}}

{{ labviewconfigurationkey
| keyname = BldApp.RemovePolyVIsandTypedefs
| example =BldApp.RemovePolyVIsandTypedefs=FALSE
| datatype =b
| description =Setting this to <code>FALSE</code> stops the LabVIEW Application Builder from aggressively removing polymorphic VIs and typedefs that it thinks are not required
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 7
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =By default, the LabVIEW 7.x Application Builder does not include type definitions and unused instances of polymorphic VIs into executable in order to decrease size of application. This setting can be changed in the LabVIEW 7.1 applciation Builder in the Application Settings page.
If a VI in your build calls an external VI that uses a type definition in order to pass parameters, and the AppBuilder is unaware of this external VI, it will end in tears.
Also there is one other issue which makes this setting very important. In LabVIEW 7.x, by disconnecting typedefs from controls they did loose their default data and return to LabVIEWs default default data. This could be a major problem if you used strict typedefed clusters on front panels to provide certain default data when unwired and those default data did not match LabVIEWs default default data. This has been mostly fixed in newer LabVIEW versions from 8.0 on.
}}

{{ labviewconfigurationkey
| keyname = coerceFromVariant
| example =coerceFromVariant=TRUE
| datatype =b
| description =Force variants to automatically coerce to any data type that they are connected to
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 7
| LV2 = 8
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Tread carefully, as using this function removes coercion notification, and does not use error handling
}}

{{ labviewconfigurationkey
| keyname = cleanupVisa
| example =cleanupVisa=TRUE
| datatype =b
| description =Automatically close VISA sessions - do not require the use of the ''VISA Close'' VI
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = defaultConPane
| example = defaultConPane=4833
| datatype = I32
| description = Sets the default [[Connector pane]] layout for new VIs
| permitted_values =
| default = (4815)
| LV1 = 8.x
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 =
| notes = Source: NI Knowledge Base
( http://digital.ni.com/public.nsf/allkb/279F064F0688C114862570900057678C )
}}

{{ labviewconfigurationkey
| keyname = dropThroughClicks
| example =dropThroughClicks=FALSE
| datatype = i
| description =Allow drop-through clicks
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = ExternalNodesEnabled
| example =ExternalNodesEnabled=FALSE
| datatype =b
| description =Enables use of [[External Nodes]]
| permitted_values =TRUE or FALSE
| default =6.x?, 7.x: TRUE 8.x: FALSE
| LV1 = 6.x?
| LV2 = 7
| LV3 = 8
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = ExternalNodeDebugging
| example =ExternalNodeDebugging=FALSE
| datatype =b
| description =Shows External Nodes for what they are: sequence diagrams
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 7
| LV2 = 8
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = hotMenus
| example =hotMenus=FALSE
| datatype =b
| description =Use hot menus
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = MaxHelpDescLength
| example =MaxHelpDescLength=8000
| datatype =i
| description =Maximum number of characters that will be displayed before truncation in the Context Help
| default =8000
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =If set to a non-positive number, then there will be no max. If set to 50 or less, then 50 will be the max
}}

{{ labviewconfigurationkey
| keyname = MRUFolders
| example = MRUFolders=TRUE
| datatype = b
| description = MRUFolders:Most recently used folders. Every time you select a file in a file dialog in LabVIEW, that location (folder) becomes the new top item in the location area (left side of the dialog) of the Windows file dialog.
| permitted_values = TRUE, FALSE
| default = FALSE
| LV1 = 8.2
| OS1 = w
}}

{{ labviewconfigurationkey
| keyname = openInRun
| example =openInRun=TRUE
| datatype =b
| description =When opening VIs in the development environment, open them in ''run mode''
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 3
| LV2 = 4
| LV3 = 5
| LV4 = 6
| LV5 = 7
| LV6 = 8
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = readOnlyLock
| example =readOnlyLock=TRUE
| datatype =b
| description =Treat read-only VIs as locked
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =It is important to set this to <code>TRUE</code> when using source code control outside of the LabVIEW environment, so LabVIEW will not allow a VI that is not checked out to the user to be edited
}}

{{ labviewconfigurationkey
| keyname = showBDConstName
| example =showBDConstName=TRUE
| datatype =b
| description =Show auto-constant labels
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = showNoNavDialog
| example =showNoNavDialog=TRUE
| datatype =b
| description =Prevents the "Getting Started Window" dialog from appearing
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =
| OS4 =
| notes = Source: NI Knowledge Base ( http://digital.ni.com/public.nsf/allkb/841B934909D863C886256F62006AC243?OpenDocument )
}}

{{ labviewconfigurationkey
| keyname = ShowTipStrings
| example =ShowTipStrings=FALSE
| datatype =b
| description =Display Tip Strips during execution
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =u
| notes =None
}}

{{ labviewconfigurationkey
| keyname = skipNavigatorDialog
| example =skipNavigatorDialog=TRUE
| datatype =b
| description =Skip the navigation dialog on development environment launch
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = SuperSecretPrivateSpecialStuff
| example =SuperSecretPrivateSpecialStuff=TRUE
| datatype =b
| description =Exposes private properties, method and events in the IDE
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Not supported by NI, this is not a scripting method.
}}

{{ labviewconfigurationkey
| keyname = suppressFileDlgForMissingVIs
| example =suppressFileDlgForMissingVIs=TRUE
| datatype =b
| description =Suppresses the file dialog for when loading a VI that has missing SubVIs
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = useNativeFileDialog
| example =useNativeFileDialog=FALSE
| datatype =b
| description =Use the OS native file dialogs
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = userVIsAppearFirst
| example =userVIsAppearFirst=TRUE
| datatype =b
| description =Makes the user VIs appear first in the tool menu
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 6
| LV2 = 7
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Unfortunately this option no longer works in LabVIEW versions 8+.
}}

{{ labviewconfigurationkey
| keyname = XNodeWizardMode
| example =XNodeWizardMode=TRUE
| datatype =b
| description =Allows contextual menus on [[XNodes]] to facilitate debugging
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = MaxGSWRecentProjects
| example =MaxGSWRecentProjects=10
| datatype =i
| description =Allows more projects to be added to the Getting Started Window
| permitted_values = 1 to 10
| default = 2
| LV1 = 2009
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = operateCursorRunningVIs
| example = operateCursorRunningVIs=TRUE
| datatype =b
| description =Changes the default cursor on running VIs to its behavior prior to LabVIEW 2012
| permitted_values =TRUE or FALSE
| default = FALSE
| LV1 = 2012
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = useNewProjWiz
| example = useNewProjWiz =FALSE
| datatype =b
| description =Set to FALSE to make the Create Project menu items (in File and Project) open empty projects instead of launching the Create Project dialog.
| permitted_values =TRUE or FALSE
| default = TRUE
| LV1 = 2012
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = QuickBold
| example = QuickBold=TRUE
| datatype = b
| description = When editing text (either on the block diagram or the front panel) Ctrl-B allows you to toggle '''bold''' on or off. (When not editing text, Ctrl-B still performs it's normal function: remove broken wires.)
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 2013
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 =
| notes =
}}

[[Category:Configuration File|Misc]]

LabVIEW configuration file/Miscellaneous

2014-02-19T23:54:38Z

Jeffreyh:

This is a list of Miscellaneous LabVIEW ini File settings. {{TOCright}}

{{ labviewconfigurationkey
| keyname = BldApp.RemovePolyVIsandTypedefs
| example =BldApp.RemovePolyVIsandTypedefs=FALSE
| datatype =b
| description =Setting this to <code>FALSE</code> stops the LabVIEW Application Builder from aggressively removing polymorphic VIs and typedefs that it thinks are not required
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 7
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =By default, the LabVIEW 7.x Application Builder does not include type definitions and unused instances of polymorphic VIs into executable in order to decrease size of application. This setting can be changed in the LabVIEW 7.1 applciation Builder in the Application Settings page.
If a VI in your build calls an external VI that uses a type definition in order to pass parameters, and the AppBuilder is unaware of this external VI, it will end in tears.
Also there is one other issue which makes this setting very important. In LabVIEW 7.x, by disconnecting typedefs from controls they did loose their default data and return to LabVIEWs default default data. This could be a major problem if you used strict typedefed clusters on front panels to provide certain default data when unwired and those default data did not match LabVIEWs default default data. This has been mostly fixed in newer LabVIEW versions from 8.0 on.
}}

{{ labviewconfigurationkey
| keyname = coerceFromVariant
| example =coerceFromVariant=TRUE
| datatype =b
| description =Force variants to automatically coerce to any data type that they are connected to
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 7
| LV2 = 8
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Tread carefully, as using this function removes coercion notification, and does not use error handling
}}

{{ labviewconfigurationkey
| keyname = cleanupVisa
| example =cleanupVisa=TRUE
| datatype =b
| description =Automatically close VISA sessions - do not require the use of the ''VISA Close'' VI
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = defaultConPane
| example = defaultConPane=4833
| datatype = I32
| description = Sets the default [[Connector pane]] layout for new VIs
| permitted_values =
| default = (4815)
| LV1 = 8.x
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 =
| notes = Source: NI Knowledge Base
( http://digital.ni.com/public.nsf/allkb/279F064F0688C114862570900057678C )
}}

{{ labviewconfigurationkey
| keyname = dropThroughClicks
| example =dropThroughClicks=FALSE
| datatype = i
| description =Allow drop-through clicks
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = ExternalNodesEnabled
| example =ExternalNodesEnabled=FALSE
| datatype =b
| description =Enables use of [[External Nodes]]
| permitted_values =TRUE or FALSE
| default =6.x?, 7.x: TRUE 8.x: FALSE
| LV1 = 6.x?
| LV2 = 7
| LV3 = 8
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = ExternalNodeDebugging
| example =ExternalNodeDebugging=FALSE
| datatype =b
| description =Shows External Nodes for what they are: sequence diagrams
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 7
| LV2 = 8
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = hotMenus
| example =hotMenus=FALSE
| datatype =b
| description =Use hot menus
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = MaxHelpDescLength
| example =MaxHelpDescLength=8000
| datatype =i
| description =Maximum number of characters that will be displayed before truncation in the Context Help
| default =8000
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =If set to a non-positive number, then there will be no max. If set to 50 or less, then 50 will be the max
}}

{{ labviewconfigurationkey
| keyname = MRUFolders
| example = MRUFolders=TRUE
| datatype = b
| description = MRUFolders:Most recently used folders. Every time you select a file in a file dialog in LabVIEW, that location (folder) becomes the new top item in the location area (left side of the dialog) of the Windows file dialog.
| permitted_values = TRUE, FALSE
| default = FALSE
| LV1 = 8.2
| OS1 = w
}}

{{ labviewconfigurationkey
| keyname = openInRun
| example =openInRun=TRUE
| datatype =b
| description =When opening VIs in the development environment, open them in ''run mode''
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 3
| LV2 = 4
| LV3 = 5
| LV4 = 6
| LV5 = 7
| LV6 = 8
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = readOnlyLock
| example =readOnlyLock=TRUE
| datatype =b
| description =Treat read-only VIs as locked
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =It is important to set this to <code>TRUE</code> when using source code control outside of the LabVIEW environment, so LabVIEW will not allow a VI that is not checked out to the user to be edited
}}

{{ labviewconfigurationkey
| keyname = showBDConstName
| example =showBDConstName=TRUE
| datatype =b
| description =Show auto-constant labels
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = showNoNavDialog
| example =showNoNavDialog=TRUE
| datatype =b
| description =Prevents the "Getting Started Window" dialog from appearing
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =
| OS4 =
| notes = Source: NI Knowledge Base ( http://digital.ni.com/public.nsf/allkb/841B934909D863C886256F62006AC243?OpenDocument )
}}

{{ labviewconfigurationkey
| keyname = ShowTipStrings
| example =ShowTipStrings=FALSE
| datatype =b
| description =Display Tip Strips during execution
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =u
| notes =None
}}

{{ labviewconfigurationkey
| keyname = skipNavigatorDialog
| example =skipNavigatorDialog=TRUE
| datatype =b
| description =Skip the navigation dialog on development environment launch
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = SuperSecretPrivateSpecialStuff
| example =SuperSecretPrivateSpecialStuff=TRUE
| datatype =b
| description =Exposes private properties, method and events in the IDE
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Not supported by NI, this is not a scripting method.
}}

{{ labviewconfigurationkey
| keyname = suppressFileDlgForMissingVIs
| example =suppressFileDlgForMissingVIs=TRUE
| datatype =b
| description =Suppresses the file dialog for when loading a VI that has missing SubVIs
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 5
| LV2 = 6
| LV3 = 7
| LV4 = 8
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = useNativeFileDialog
| example =useNativeFileDialog=FALSE
| datatype =b
| description =Use the OS native file dialogs
| permitted_values =TRUE or FALSE
| default =TRUE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = userVIsAppearFirst
| example =userVIsAppearFirst=TRUE
| datatype =b
| description =Makes the user VIs appear first in the tool menu
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 6
| LV2 = 7
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =Unfortunately this option no longer works in LabVIEW versions 8+.
}}

{{ labviewconfigurationkey
| keyname = XNodeWizardMode
| example =XNodeWizardMode=TRUE
| datatype =b
| description =Allows contextual menus on [[XNodes]] to facilitate debugging
| permitted_values =TRUE or FALSE
| default =FALSE
| LV1 = 8
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = MaxGSWRecentProjects
| example =MaxGSWRecentProjects=10
| datatype =i
| description =Allows more projects to be added to the Getting Started Window
| permitted_values = 1 to 10
| default = 2
| LV1 = 2009
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = operateCursorRunningVIs
| example = operateCursorRunningVIs=TRUE
| datatype =b
| description =Changes the default cursor on running VIs to its behavior prior to LabVIEW 2012
| permitted_values =TRUE or FALSE
| default = FALSE
| LV1 = 2012
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}

{{ labviewconfigurationkey
| keyname = useNewProjWiz
| example = useNewProjWiz =FALSE
| datatype =b
| description =Set to FALSE to make the Create Project menu items (in File and Project) open empty projects instead of launching the Create Project dialog.
| permitted_values =TRUE or FALSE
| default = TRUE
| LV1 = 2012
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| LV6 =
| OS1 =w
| OS2 =m
| OS3 =l
| OS4 =
| notes =None
}}
{{ labviewconfigurationkey
| keyname = QuickBold
| example = QuickBold=TRUE
| datatype = b
| description = When editing text (either on the block diagram or the front panel) Ctrl-B allows you to toggle '''bold''' on or off. (When not editing text, Ctrl-B still performs it's normal function: remove broken wires.)
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 2013
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 =
| notes =
}}

[[Category:Configuration File|Misc]]

Labviewconfigurationkeysandbox

2014-02-19T23:52:27Z

Jeffreyh:

{{ labviewconfigurationkey
| keyname = QuickBold
| example = QuickBold=TRUE
| datatype = b
| description = When editing text (either on the block diagram or the front panel) Ctrl-B allows you to toggle '''bold''' on or off. (When not editing text, Ctrl-B still performs it's normal function: remove broken wires.)
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 2013
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 =
| notes =
}}
{{ labviewconfigurationkey
| keyname = copyDeleteFPDCOFromFPTerm
| example = copyDeleteFPDCOFromFPTerm=TRUE
| datatype = b
| description = Delete front panel terminals from diagram
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 = u
| notes =
}}
{{ labviewconfigurationkey
| keyname = copyDeleteFPDCOFromFPTerm
| example = copyDeleteFPDCOFromFPTerm=TRUE
| datatype = i
| description = Delete front panel terminals from diagram
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 = u
| notes =<br />
*0 is equivalent to turning off the Preferences menu item "Run with multiple threads"
*1 is the default value, equivalent to turning on "Run with multiple threads"
*2 to 8 defines a higher number of threads to start (i.e. a 5x5 matrix)
*-1 tells LabVIEW to start with a custom set of threading parameters as defined by ESys.xxx.yyyy keys
}}

Labviewconfigurationkeysandbox

2014-02-19T23:51:16Z

Jeffreyh:

{{ labviewconfigurationkey
| keyname = QuickBold
| example = QuickBold=TRUE
| datatype = b
| description = When editing text (either on the block diagram or the front panel) Ctrl-B allows you to toggle '''bold''' on or off. (When not editing text, Ctrl-B still performs it's normal function: remove broken wires.)
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 2013
| LV2 =
| LV3 =
| LV4 =
| LV5 =
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 = u
| notes =
}}
{{ labviewconfigurationkey
| keyname = copyDeleteFPDCOFromFPTerm
| example = copyDeleteFPDCOFromFPTerm=TRUE
| datatype = b
| description = Delete front panel terminals from diagram
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 = u
| notes =
}}
{{ labviewconfigurationkey
| keyname = copyDeleteFPDCOFromFPTerm
| example = copyDeleteFPDCOFromFPTerm=TRUE
| datatype = i
| description = Delete front panel terminals from diagram
| permitted_values = TRUE or FALSE
| default = FALSE
| LV1 = 4
| LV2 = 5
| LV3 = 6
| LV4 = 7
| LV5 = 8
| OS1 = w
| OS2 = m
| OS3 = l
| OS4 = u
| notes =<br />
*0 is equivalent to turning off the Preferences menu item "Run with multiple threads"
*1 is the default value, equivalent to turning on "Run with multiple threads"
*2 to 8 defines a higher number of threads to start (i.e. a 5x5 matrix)
*-1 tells LabVIEW to start with a custom set of threading parameters as defined by ESys.xxx.yyyy keys
}}

LabVIEW configuration file/Miscellaneous

2012-11-27T21:56:23Z

Jeffreyh: